AMT Datasouth 2012 M6 Plus - Manual (Page 11)

5
1.6 Media Specifications
Media Specifications 203 dpi models 300 dpi models
Label roll capacity 8 in (203.2 mm) OD
Media alignment Edge alignment
Media type Continuous, die-cut, black mark, fan-fold, notch
Media wound type Printing face outside wound
Max. 4.6 in (118 mm) Media width (label +
liner) Min. 1.0 in (25.4 mm)
Max. 11 mil (0.28 mm) Media thickness (label
+ liner) Min. 2.36 mil (0.06 mm)
Media core diameter 1~3 in (25.4 mm~76.2 mm)
Label length 0.2~90 in (5~2286 mm) 0.2~40 in (5~1,016 mm)
Max. 6 in (152.4 mm) Label length (peeler
mode) Min. 1 in (25.4 mm)
Max. 90 in (2,286 mm) Max. 40 in (1,016 mm) Label length (cutter
mode) Min. 1 in (25.4 mm) Min. 1 in (25.4 mm)
Gap height Min. .078 in (2 mm)
Black mark height Min. .078 in (2 mm)
Black mark width Min. .31 in (8 mm)