AMT Datasouth 2012 M6 Plus User Manual

Page 38

Advertising

Note: If printing from enclosed software/driver, the “Use current printer settings” option

is enabled, software/driver will not send out the SHIFT command to overwrite the

settings set from the front panel.

3.1.1-1.7 Reference X & Reference Y:

This option is used to set the origin of printer coordinate system horizontally and vertically.

Press the

button to move the cursor from left digit to right digit, and press the

button to set the value from “0” to “9”. Press the

button to set the value into

printer. Press

key to cancel the setting and return to the previous menu. The

default value is 000.

Note: If printing from enclosed software/driver, the software/driver will send out the

REFERENCE command, which will overwrite the setting set from the front panel.

3.1.1-1.8 Code Page:

Use this option to set the code page of international character set. For more information about

code page, please to refer the programming manual.

When enter the code page list, the code page in the right side of “>” icon is the printer current

setting.

Press the

and

to select the code page, and press the

button to

enable the setting. Press

key to cancel the setting and return to the previous

menu.

Note: If printing from enclosed software/driver, the software/driver will send out the

command, which will overwrite the setting set from the front panel.

7-bit 8-bit

code page name

International

code page number

International

Character Set

Print Setup 9/12

Shift Y

Reference X

Reference Y

000

Print Setup 10/12

Reference X

Reference Y

Code Page

Code Page 11/41

850

852

860

Advertising

Popular Brands

Popular manuals