AMT Datasouth 2012 M6 Plus User Manual
Page 60
Advertising
3.1.3.4 Stop Bit
(s)
:
Serial Comm. 4/5
Parity
Data Bits
>
Stop Bit(s)
Stop Bit(s) 1/3
>
1
2
Exit
This option is used to set the RS-232 Stop Bits. The default setting is “1” stop bit. Press
and
buttons to select the different Stop Bits and press
button to set the
value into printer. When you enter this list, the option in the right side of “>” icon is the printer
current setting. Press
key to cancel the setting and return to the previous menu.
54
Advertising