AMT Datasouth 2012 M6 Plus - Manual (Page 63)

3.1.4.2.2 Static IP
Use this menu to set the printer’s IP address, subnet mask and gateway.
Ethernet 2/3
Status
> Configure
Exit
57
Press and buttons to select the different options and press
button to enter the option. Press key to cancel the setting and return to the
previous menu.
Press button to move the cursor from left to right digits and press the
button to scroll the value from “0” to “9”. Press button to next setting.
Configure 2/3
DHCP
> Static IP
Exit
IP Address
000.000.000.000
Gateway
000.000.000.000
Subnet Mask
000.000.000.000
Static IP
SELECT: YES
MENU: NO
Press the button printer will restart to reset the Ethernet module setting. Press
key to cancel the setting.