AMT Datasouth M5TT Plus - Manual (Page 15)

Document #120522 Rev-A 12
3.6 Peel-off Module Installation (Option)
1. Open the top cover and remove the front panel from the printer.
Fig. 12 Remove the front panel
2. Lift and hold the top cover while pushing down and sliding the cover support
arm backwards to release.
3. Use a screwdriver to remove 6 screws on the lower inner cover.
Fig. 13 Remove 6 screws from lower inner cover
Front Panel
Lower Cover
Screws
Lower Inner
Cover
Top Cover
Screws
Top Cover Support Arm
Flute