AMT Datasouth M5TT Plus - Manual (Page 25)

Document #120522 Rev-A 22
3.8.2 Printer Function
(Calibrate, Ethernet, RTC setup…)
1. Select the PC interface connected with bar code printer.
2. Click the “Function” button to setting.
3. The detail functions in the Printer Function Group are listed as below.
Function Description
Factory Default
Initialize the printer and restore the settings
to factory default.
Dump Text To activate the printer dump mode.
Configuration Page Print printer configuration.
RTC Setup
Synchronize printer Real Time Clock with
PC.
Calibrate Sensor
Calibrate the sensor specified in the Printer
Setup group media sensor field.
Reset Printer Reboot the printer.
Print Test Page Print a test page.
Ignore AUTO.BAS
Ignore the downloaded AUTO.BAS
program.
Ethernet Setup
Setup the IP address, subnet mask,
gateway for the on board Ethernet.
Note:
For more information about Diagnostic Tool, please refer to the diagnostic utility
quick start guide in the CD disk \ Utilities directory.