AMT Datasouth M5TT Plus - Manual (Page 33)

Document #120522 Rev-A 30
3. Release the FEED button when LED becomes solid green .
The LED color will be changed in the following:
Amber red (5 blinks) amber (5 blinks) green (5 blinks)
green/amber (5 blinks) red/amber (5 blinks) solid
green
4. Printer will be interrupted to run the PAL application program.
5. Maintenance
5.1 Cleaning
This session presents the cleaning tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
Cotton swab ( Head cleaner pen )
Lint-free cloth
Vacuum / Blower brush
100% ethanol
2. The cleaning process is described as following
Printer Part Method Interval
1. Always turn off the printer
before cleaning the print head.
2. Allow the print head to cool for a
minimum of one minute.
3. Use a cotton swab (Head
cleaner pen) and 100% ethanol
to clean the print head surface.
Clean the print head when
changing a new label roll
Print Head
Platen Roller
1. Turn the power off.
2. Rotate the platen roller and
wipe it thoroughly with 100%
Clean the platen roller when
changing a new label roll