E.1.2 canada, E.1.3 uk, E.1.4 eu – Dolby Laboratories DP570 User Manual

Page 120: E.1.2 canada e.1.3 uk e.1.4 eu

Advertising
background image

108

Dolby

®

DP570 Multichannel Audio Tool User’s Manual

Regulatory Notices and Fuse Information

Regulatory Notices

13. On some equipment, the appliance coupler (power cord) is used as the mains 

disconnect device and should be readily accessible and free from obstacles.

14. Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power‐supply cord or plug is 
damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has 
been dropped.

E.1.2 Canada

This Class A digital apparatus complies with Canadian ICES‐003.

E.1.3 UK

The power cord, Dolby

®

 Part No. 92021, supplied for use in Europe, is not suitable for use 

in the UK. To use the cord in the UK cut off the CEE7/7 plug and replace with an approved 
BS 1363 13A plug.

The core, colored green and yellow, must be connected to the terminal in the plug that is 

marked with the letter or by the ground symbol 

 or colored green or green and yellow.

The core, colored blue, must be connected to the terminal that is marked with the letter 
or colored black.

The core, colored brown, must be connected to the terminal that is marked with the letter 
or colored red.

This apparatus must be earthed.

E.1.4 EU

This equipment complies with the EMC requirements of EN55103‐1:1996 (Emission) and 
EN55103‐2:1996 (Immunity) when operated in an E2 environment in accordance with this 
manual. The power cord with CEE7/7 plug, Dolby Part No. 92021, supplied with this unit 
must be used with a polarized socket, or the socket must be supplied via a residual current 
breaker (RCD).

The mains power disconnect device for this unit is the plug‐in mains cord rather than a 
power switch. The mains cord must remain readily accessible for disconnecting mains 
power. This equipment is designed to mount in a suitably ventilated 19ʺ rack. Ensure that 
any ventilation slots in the unit are not blocked or covered.

Warning: Troubleshooting must be performed by a trained technician. Do not attempt to 

service this equipment unless you are qualified to do so.

Advertising