Dolby Laboratories DP570 - Manual (Page 17)

Dolby ® DP570 Multichannel Audio Tool User’s Manual 5
Chapter 2
Getting Started
This chapter describes the actions necessary to begin using the DP570 in a basic
configuration.
2.1 Unpacking and Inspection
Before unpacking the unit, inspect the outer carton for shipping damage. If the carton
shows damage, inspect the unit in those areas.
Several essential items are provided with the unit, including:
• Power cords for use in the United States and continental Europe.
• A CD‐R containing the DolbyRemote 570 application and soft copy documentation.
• A bag containing 75Ω terminators, rackmount screws and washers, and a serial
connection cable for the front‐panel RS‐232 port.
• Safety notices.
• Warranty information. Fill out the warranty card and return it to Dolby Laboratories.
2.2 Safety Information
Before you begin installing your DP570, refer to the important safety notices and fusing
information included in
Regulatory Notices and Fuse Information on page 107.
2.3 Installing the DP570
Operating a DP570 requires:
• A rackspace two standard units high
• Venting
• Input connections
• Output connections
• A suitable monitoring system
(For information on setting up and calibrating a successful monitoring system, see
Configuring a Monitor System on page 61.)
• A power connection
Note: To maintain your eligibility for software upgrades, register your product on the
software upgrades page at www.dolbysupport.com .