ClassCo VoiceAnnounce Caller ID 9900CW - Manual (Page 14)

14
Entering a Telephone Number Manually
Do you need to enter a number manually? You can record names
and outgoing messages for any number that is already stored in
the call log, or stored in the list of calls with recorded names or
messages. If the number you want is not already stored in memory,
you can enter it manually.
1. If the number and/or name of the person you want does not
appear in the call log, press the MODE key repeatedly until
XXX-XXX-XXXX ENTER NUMBER appears on the display
screen of the caller ID unit.
2. Press the RECORD key to select the first digit of the desired
number.
3. To move to the second digit of the desired number, press the
forward REVIEW key. Use the RECORD key to select a num­
ber, then use the forward REVIEW key to move to the next
digit. (note: you can also use the reverse REVIEW key to go
to previous digits.)
4. When the complete number is displayed, press the MODE
key to select recording or selecting names or outgoing mes­
sages.
Note: You can leave some digits blank (X) to indicate a “wildcard.”
For example, you could enter “603-XXX-XXXX” and record “Call
from New Hampshire.” Calls from the 603 area code that do not
specifically match other numbers will be announced as “Call from
New Hampshire.”