ClassCo VoiceAnnounce Caller ID 9900CW - Manual (Page 17)

How Do I Delete What I’ve Recorded?
Follow the steps above to review what you’ve recorded until you
hear the name or outgoing message you want to delete. Then
press the CLEAR key. The recording associated with that caller
will be deleted.
Dial Back
You can dial back callers directly from the call log. Use the RE­
VIEW keys to locate the person you want to call. With the call
information displayed on the screen, pick up the phone like you
normally do to make a call, but instead of dialing, press the MODE/
DIAL key on the caller ID unit. If you’re placing a call that requires
dialing only 7-digits, press the MODE/DIAL key again to complete
the call. If 10-digit or 1+10-digit dialing is necessary to place the
call, use the REVIEW keys to select the appropriate dialing method,
then press the MODE/DIAL key to complete the call.
Message Waiting Notification
Your VoiceAnnounce 9900CW will alert you if you have voice mail
messages. This requires a special service from your local tele­
phone company. The unit will detect both FSK and stuttered dialtone
(SDT) message notification signals. When message waiting is
detected, the unit displays a message waiting icon on the LCD, and
will flash its LED fast. You can choose to have an audible notifica­
tion (beep every minute) by selecting the MSG WAIT BEEP option
in the custom setup options.
17