ClassCo VoiceAnnounce Caller ID 9900CW - Manual (Page 21)

FCC Information
Your caller ID unit has been registered with the Federal Communications Com­
mission (FCC), and it complies with the standards set forth in part 68 of the
FCC rules. The FCC requires that we provide the following information.
Connection And Use:
The FCC requires you to use a modular telephone jack. This equipment may
not be used with party line service or coin-operated telephone lines.
Notification Of The Telephone Company
The FCC requires that upon request of your local telephone company you
provide the following information: the line to which you will connect the caller
ID unit (your phone number), the caller ID units FCC registration number and
ringer equivalence number (REN) (located on the back of your caller ID unit),
and the USOC jack required (USOC RJ-11C or RJ-11W). (note: the REN is
useful in determining how many devices you may connect to your telephone
line and still have all of them ring when someone calls your telephone number.
in most, but not all areas, the sum of all RENs should be five or less. contact
your local telephone company for more information.)
Problems And Repairs
If your caller ID unit is malfunctioning, the FCC requires you to completely
disconnect it until the problem has been solved. If your caller ID unit is harm­
ing the nationwide telephone network, the telephone company may tempo­
rarily discontinue your telephone service. The telephone company will try to
notify you before discontinuing service. If advance notice isn’t possible, the
telephone company will notify you as soon as possible. you’ll be given the
opportunity to correct the problem, and you’ll be informed of your right to file a
complaint with the FCC.
Your local telephone company may make changes in facilities, equipment or
operations that affect the proper functioning of your caller ID unit. If such
changes are planned, you’ll be notified and advised of your right to file a com­
plaint with the FCC.
21