ClassCo VoiceAnnounce Caller ID 9900CW - Manual (Page 9)

Installation
Inside the VoiceAnnounce 9900CW package you will find the
VoiceAnnounce Caller ID unit, users guide, a phone cord, and an
AC power adapter.
1. Connect the phone cord that extends from the telephone jack
on your wall to the LINE jack on the back of the caller ID unit.
2. Use the supplied phone cord to connect your telephone set to
the PHONE jack on the back of the caller ID unit. (This also
applies if connecting the base of a cordless phone.)
3. Use the included power adapter to power the unit.
If your household experiences a power outage the caller ID unit will
shut off without being damaged. It will remember calls in the log,
recordings, and other settings, so you won’t have to re-program the
unit when the power comes back on. When the power is restored,
the caller ID unit will be ready to screen calls.
9