ClassCo VoiceAnnounce Caller ID 9900CW - Manual (Page 16)

16
Leaving Outgoing Messages for specific callers
You can have your VoiceAnnounce 9900CW answer the phone and
deliver a special message to specific callers. You can use this
feature to tell certain people where you are, or what time you’ll be
home. You can even use this feature to intercept nuisance calls
with a message specifically for them.
Up to two outgoing messages (OGMs) can be recorded. One of the
messages is temporary, and will only be delivered once to each
specific caller. The other message is permanent and will be deliv­
ered to specific callers every time they call.
While the caller’s telephone number is displayed, press the MODE
key until the RECORD OGM mode is displayed. Using the RE­
VIEW keys, select which message type you prefer – either a tem­
porary or a permanent message. Then press and hold the RECORD
key, wait for the “beep”, and record your message. Release the
RECORD key when you’re done. Each message type is maximum
10-seconds long.
If you want the displayed number to receive an outgoing message
that has already been recorded, press the MODE key until SE­
LECT OGM is displayed. Then press either REVIEW key until you
hear the message you want to use. Finally press the RECORD key
momentarily to associate the message with the number displayed
on the screen.
How do I review what I’ve Recorded?
Press and release the MODE key until REVIEW NAMES or RE­
VIEW OGM appears on the display screen. Then press one of the
REVIEW keys to scroll through the numbers for which you have
recorded names or outgoing messages. You’ll hear the recorded
name or outgoing message for each number announced as you
scroll through the list.