ClassCo VoiceAnnounce Caller ID 9900CW - Manual (Page 6)

6
Important Notice
The VoiceAnnounce 9900CW will announce the
caller ID for incoming calls over the built-in
speaker.
To Turn OFF the caller ID announcement:
1. Press the MODE key nine times, or until you see
the words “Adjust Volume” on the display.
2. Press the REVIEW BACK key until you see the
words “Volume - OFF” and hear it “beep” twice.
To make the VOLUME of the caller ID announcement
louder or softer:
1. Press the MODE key nine times, or until you see
the words “Adjust Volume” on the display.
2. Press the REVIEW BACK key until you see the
words indicating the volume level of LOW, MEDIUM,
or HIGH, and hear a “beep” at that volume setting.