Ditch Witch RT45 - Manual (Page 118)

RT45 Operator’s Manual
Microtrenching - 119
Setup
CMW
®
Adjust Tilt
1. Lower microtrencher and turn off tractor.
2. Loosen 4 clamp bolts (2, and two on other
side of mount).
3. Adjust manual adjustment turn screw (1) and
watch bubble level (3) until desired tilt is
achieved.
4. Tighten clamp bolts.
Adjust Level Indicator
1. Shut down tractor and remove blade. (See
page 180.)
2. Using lift control and level control, position
base of microtrencher flat on pavement.
3. Loosen bolts (1) in adjustable link and align
moving pointer (2) with fixed pointer.
4. Tighten bolts.
IMPORTANT: Microtrenching requires good
contact between the microtrencher frame and
the surface being cut. Use lift control, level
control, and manual tilt to adjust microtrencher
to match jobsite conditions.