Position tractor, Attach product, Rt45 operator’s manual – Ditch Witch RT45 User Manual
Page 90
Advertising
RT45 Operator’s Manual
Plow - 91
Setup
CMW
®
Position Tractor
1.
Fasten and adjust seat belt.
2.
Start tractor. See page 72 for start-up procedures.
3.
Drive to starting point. Move in line with planned trench. See page 74 for operating procedures.
4.
Lower backfill blade.
5.
Engage parking brake.
6.
Lower plow to starting point of trench.
7.
Turn ignition switch to STOP.
Attach Product
To Pull Product
1.
Insert material into pulling grip.
2.
Tape grip with duct tape.
IMPORTANT: If material must be at a constant depth, dig starting and target trenches.
Advertising