Engine oil selection chart, Approved fuel, Rt45 operator’s manual – Ditch Witch RT45 User Manual
Page 138: Engine oil selection chart approved fuel
RT45 Operator’s Manual
Service - 141
Recommended Lubricants/Service Key
CMW
®
Engine Oil Selection Chart
Approved Fuel
The engine is this unit is designed to run on diesel fuel. Use only high-quality fuel meeting ASTM D975 No.
2D, EN590, or equivalent. At temperatures below 32°F (0°C), winter fuel blends are acceptable. See
engine operation manual for more information.
Biodiesel blends up to 5% (B5) are approved for use in this unit. The fuel used must meet the
specifications for diesel fuel shown above. Extra attention is needed when using biodiesel, especially when
operating in cold weather or storing fuel. Contact your Ditch Witch
®
dealer or the engine manufacturer for
more information.
Avoid static electricity when fueling. Ultra Low Sulfur Diesel (ULSD)
poses a greater static ignition hazard than earlier diesel formulations. Avoid death or
serious injury from fire or explosion. Consult with your fuel system supplier to ensure the
delivery system is in compliance with fueling standards for proper grounding and bonding
practices.
NOTICE: Use only Ultra Low Sulfur Diesel (less than 15 ppm (15 mg/kg) sulfur content) in this unit.
Operating with higher sulfur content will damage the engine and after treatment device.
Select oil based on ambient temperature range expected before next oil change.