Ditch Witch RT45 - Manual (Page 151)

Service - 154
RT45 Operator’s Manual
10 Hour
CMW
®
Microtrencher
Inspect Slide Plate
Inspect side plate for wear every 10 hours.
Replace as needed.
Inspect Spoils Deflectors
If not using a vacuum system for spoils removal,
inspect spoils deflectors inside microtrencher
frame every 10 hours. Clean vacuum chute and
replace deflectors as needed.
Check Trencher Vacuum Hoses
If using a vacuum system for spoils removal,
check inside of hoses for caked spoils every 10
hours. Clean as needed.