Ditch Witch RT45 - Manual (Page 184)

RT45 Operator’s Manual
Specifications - 187
RT45 Tractor with H313 Trencher
CMW
®
Unless otherwise specified, all figures are for standard equipment only.
Specifications are called out according to SAE recommended procedures. Specifications are general and subject to change without
notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered
equipment may not necessarily match that described.
Fluid Capacities U.S. Metric
Fuel tank 13 gal 49 L
Engine oil 6.4 qt 6.1 L
Hydraulic reservoir 9.5 gal 36 L
Hydraulic system 13 gal 49 L
Engine coolant 3 gal 11 L
Battery
Group 26/26R/70, SAE reserve capacity 165 min., SAE cold crank @ 0° F (-18° C), 850 amps
Noise Levels
Operator ear sound pressure is 96 dBa per ISO 6394
Exterior sound power is 108 dBa per ISO 6393.
Vibration Levels
Average vibration transmitted to the operator’s hand during normal trenching operation does not exceed
2.5 m/sec
2
. Average vibration transmitted to the operator’s whole body during normal trenching
operation is 0.8 m/sec
2
.
Average vibration transmitted to the operator’s hand and whole body during normal sawing operation is
14.8 m/sec
2
and 2.3 m/sec
2
respectively.
Average vibration transmitted to the operator’s hand and whole body during normal plowing operation is
13.2 m/sec
2
and 9.9 m/sec
2
respectively.