Harmonic Resolution Systems SXR Audio Stand - Manual (Page 17)

Photo 17 Photo 18
Completed SXR Singlewide3V version on left, and Doublewide 3V version on the
right. Both system shown with M3 Isolation Bases.
Loading Components into SXR Frame - Carefully load each component into the
SXR Audio Stand. Be careful not to hit the front edge of the isolation base because
you will scratch the frame. Once all the components are loaded, you should check
to see that none of the isolation bases are overloaded. By placing one or two
fingers on the bottom of the Support Brace and your thumb on the top of the
isolation base, you should be able to move the top of the isolation base slightly (at
all four corners) when you squeeze your finger(s) together. If there is no
compliance, remove the isolation base and component to verify the load range of
the isolation base is correctly matched with the component. The load range of the
isolation base is identified as part of the part number on the tag attached to the
bottom (see the isolation base manual for instructions). Please consult with your
authorized Harmonic Resolution Systems dealer or contact Harmonic Resolution
Systems if you need assistance. The isolation base load range can be easily
modified at any time by sending it to Harmonic Resolution Systems or an
authorized dealer to have the primary isolation stage rebuilt.
Care and Maintenance
The SXR Audio Stand is a very low maintenance item that will provide many years
of trouble-free performance by applying these basic care instructions.
Clean the external surfaces of the SXR Audio Stand frame using a professional
quality ultra soft lint-free micro-fiber cloth available in high quality automotive
stores. Use a lightly water damped cloth if you need to clean dirt from the frame.
Do not use commercial furniture polishes on the SXR.