Harmonic Resolution Systems SXR Audio Stand - Manual (Page 4)

Safety Instructions
IMPORTANT WARNINGS!
Do not place any tall objects on the top shelf of the SXR Audio Stand. A tall object
is any object with a height that is greater than the length of the isolation base. A
tall object is also any object that has a height greater than its own width or length.
Tall objects must not be placed on top of the SXR Audio Stand for any reason. The
object may become unstable and tip over causing damage to the component,
adjacent objects, or injury to people.
Never lift or move the SXR Audio Stand with the shelves (Isolation Bases) installed.
You should always move the SXR Audio Stand frame to its final location prior to
loading shelves and components. Moving the SXR Audio Stand frame with the
isolation bases installed (with or without equipment) can permanently damage the
frame system or cause the shelves to fall out of the rack resulting in potential
damage or injury. Always take the time to remove all of the equipment and shelves
to relocate the SXR Audio Stand.
Do not lift the Isolation Base (shelf) by the inner plate (M3 model) or the external
feet attached to the bottom of the rectangular frame. Always lift or move the
isolation base with the inner plate facing up and the external support feet facing
down (same orientation as when used to support your component). Always follow
these handling instructions to prevent personal injury or damage to the unit.