Harmonic Resolution Systems SXR Audio Stand User Manual
Page 8
Advertising
Step 3.
Slide a polymer ring over each of the threaded studs on the Support
Brace as shown in Photo 4. Push down until the polymer ring is seated in the
groove on the Support Brace.
Step 4.
Apply 4-5 drops of the 3-in-1 oil to the top few threads of each of the six
threaded studs as shown in Photo 5.
If assembling a SXR-1V (one high stand or amp stand) go to Step 10. If not
continue with next step.
Photo 4
Advertising