Hatteland Display 26 inch - HD 26T21 MMD (Widescreen, Touch Screen) - Manual (Page 31)

31 Installation
IND100078-34
Installation Procedures
Mounting Bracket, Table / Desktop / Ceiling - 12”,15”,17”,19”
Procedure suitable for: Display (MMD/STD) and Panel Computer (MMC) Series X product ranges.
Two versions of bracket exists, please review the table below to identify your unit model and bracket type. Brackets
that are currently sold/delivered are marked with green color. Those which are obsolete (and replaced by newer type
of bracket) are shown in red color. The two bracket types exists due to slight variation in manufacturing regarding the
unit’s mounting holes (key hole) that exist with either “single key hole” or “double key hole”.
Bracket Arms are clearly marked with Typenumber label so you can identify which version you have (BRD or TMB).
Note: If you ordered a unit with mounting bracket from factory, the corresponding matching bracket has been already
been chosen to ensure correct fitting. If you order brackets separately at a later date, you should study the table
below carefully as well as review the type of key hole your Display or Panel Computer units has. If unsure, please
contact Hatteland Display for support in choosing the correct bracket version (BRD or TMB).
Table last updated 09 Feb 2015. Throughout 2015 the BRD (HW00) versions will be phased out of production and
only TMB (HW01) versions will remain available for manufactured units.
Typenumber Illustration Fits unit model Notes Status
HD 12BRD SX1-A1 HD 12T21 MMD-xxx-Fxxx
HD 12T21 STD-xxx-Fxxx
HD 12T21 MMC-xxx-xxxx
“HW blank” and “HW00”:
Sold since 2014. Fits Single Key Hole
Chassis only. Will be replaced by
“HW01”, when HW00 is out of stock.
“HW01”:
For Double Key Hole Chassis, use
HD TMB SX1-A1 (see next page).
HD 15BRD SX1-A1 HD 15T21 MMD-xxx-Fxxx
HD 15T21 STD-xxx-Fxxx
HD 15T21 MMC-xxx-xxxx
“HW blank” and “HW00”:
Sold since January 2013, fits only Single
Key Hole Chassis. Will be replaced by
“HW01”, when HW00 is out of stock.
“HW01”:
For Double Key Hole Chassis, use
HD TMB SX1-A1 (see next page).
HD 17BRD SX1-A1 HD 17T21 MMD-xxx-Fxxx
HD 17T21 STD-xxx-Fxxx
HD 17T21 MxC-xxx-xxxx
“HW blank” and “HW00”:
Sold since June 2012, fits only Single
Key Hole Chassis. Obsolete, replaced by
“HW01”.
“HW01”:
For Double Key Hole Chassis, use
HD TMB SX1-B1 (see next page).
HD 19BRD SX1-A1 HD 19T21 MMD-xxx-Fxxx
HD 19T21 STD-xxx-Fxxx
HD 19T21 MxC-xxx-xxxx
“HW blank” and “HW00”:
Sold since March 2012, fits only Single
Key Hole Chassis. Obsolete, replaced by
“HW01”.
“HW01”:
For Double Key Hole Chassis, use
HD TMB SX1-B1 (see next page).