48 user controls osd menu overview, Osd menu structure, Input source settings (page 50-51) – Hatteland Display 26 inch - HD 26T21 MMD (Widescreen, Touch Screen) User Manual
Page 48: Image settings (page 52-56)
48
User Controls
OSD Menu Overview
IND100064-39
OSD Menu Structure
In this table all functions within menus and their submenus are shown. Functions that begins with an asterix (*) and in
bold/red font color
style indicates this function/menu is only available during “Full” menu mode or during Video CVBS
fullscreen. Functions with a “>” in the end, indicates a submenu or list of options will be displayed. Depth of the sub-
menus (levels) are identified from 1 to 5.
Input Source Settings (page 50-51)
Level 1 (Main Menu)
Level 2
Level 3
Level 4
Level 5
Exit
Input Source Settings > < Exit
Main Source >
< Exit
Digital 1, Digital 2, Analog RGB1,
Analog RGB2, Composite 1,
Composite 2, Composite 3
(Text Displayed)
Second Source >
< Exit
Digital 1, Digital 2, Analog RGB1,
Analog RGB2, Composite 1,
Composite 2, Composite 3
(Text Displayed)
Auto Source Select > Enable, Disable
Rename Source >
<On Screen Keyboard Input>
Image Settings (page 52-56)
Level 1 (Main Menu)
Level 2
Level 3
Level 4
Level 5
Image Settings >
< Exit
Auto Position >
(Automatic Action)
Auto Color Balance > (Automatic Action)
*Brightness >
(Slider Bar)
*Contrast >
(Slider Bar)
*Saturation >
(Slider Bar)
*Hue >
(Slider Bar)
Sharpness >
(Slider Bar)
Display >
< Exit
Horiz Position >
(Slider Bar)
Vertical Position >
(Slider Bar)
Clock >
(Slider Bar)
Phase >
(Slider Bar)
*Video Setup >
< Exit
Main MADI Mode >
Normal, Adaptive, Off
Noise Reduction >
< Exit
Dynamic NR Mode >
High, Medium, Low, Adaptive, Off
MPEG NR Mode >
On, Off
Sharpness Noise Coring > High, Medium, Low, Adaptive, Off
Film Mode >
2:2, 3:2, 3:2-2:2, Off
DCDi >
On, Off