Hatteland Display 26 inch - HD 26T21 MMD (Widescreen, Touch Screen) - Manual (Page 61)

61 User Controls
IND100064-38
|--------3--------
Multi-PIP Settings - PIP Position
When PIP Child mode is active, the size and position of the frame displaying the Secondary
Source can be adjusted by means of submenus for size and position respectively below.
Settings as follows:
“PIP H-Position” = Adjust the Horizontal (left/right) position for Secondary
Source, values from 0 to 100.
“PIP V-Position” = Adjust the Vertical (up/down) position for Secondary Source,
values from 0 to 100.
● Note: Default value for both functions is 0.
|---2---
Multi-PIP Settings - Swap Source
Swaps the Main and Secondary source signals (if present) including adjustments you may have
made, meaning that whatever is in Main Source will become the contents of the defined PIP
rectangle, and contents of the PIP rectangle to become full screen.
|---2---
Multi-PIP Settings - PIP Picture
When PIP mode is active, the picture appearance of the Secondary Source can be adjusted via the
following settings:
Settings as follows:
“Brightness” = Adjust the black level (brightness) of the Secondary Source, values from 0
to 100. Default is 50.
“Contrast” = Adjust the contrast of the Secondary Source, values from 0 to 100.
Default is 50.
“Saturation” = Adjust the overall color intensity of the Secondary Source, values from 0 to
100. Default is 50
“Hue” = Adjust the Hue color properties of the Secondary Source, values from 0 to
100. Default is 50.
“Sharpness” = Adjust the sharpness of the Secondary Source, values from 0 to 24.
Default is 12.
OSD Menu Functions