70 user controls osd menu functions – Hatteland Display 26 inch - HD 26T21 MMD (Widescreen, Touch Screen) User Manual
Page 70
70
User Controls
OSD Menu Functions
IND100064-38
|---2---
Management Settings
- Filter
*Available in “Full Mode” only
Filter (applies for VGA1 signal input only) is a Signal Noise Reduction technique to enhance
a possible weak or bad RGB/VGA signal. It will remove certain types of noise patterns typically
apparent in close proximity of other electronic equipment with less or lack of proper shielding to
prevent interference.
Settings as follows:
“Filter”
= Set to either “ON” or “OFF”.
● Note: Default is “OFF”
|---2---
Management Settings
- VGA Out
*Available in “Full Mode” only
Set to either “Enable” or “Disable”. More information available later.
|---2---
Management Settings
- VGA Sel
*Available in “Full Mode” only
Set to either “Enable” or “Disable”. More information available later.