HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 12)

12
compact and unique design
The X1 Pro is a super-compact, portable charging system with a
unique design that incorporates a joystick input device for very
simple operation.
Two dc Inputs
There are two DC inputs, one located on the right side of the char-
ger and the other on the bottom for docking into the ePowerBox
17A (230W 13.8V Switch DC Power Supply - Part No. 44216).
optimized operating software
The X1 Pro “AUTO” feature sets the charge and discharge current
for you automatically, preventing overcharging which can damage
your battery. In the event of an error, the X1 Pro instantly discon-
nects the circuit and sounds an alarm. This feature can be set by
the user and controlled through the two-way link for maximum
safety.
Internal Independent lithium battery balancer
The X1 Pro features a built-in cell voltage balancer eliminating the
fuss of external balancers while charging.
balancing Individual cells during discharging
The X1 Pro also monitors and balances each cell in the pack
individually while discharging. If the voltage of any single cell is
abnormal, the X1 Pro will display an error message and the pro-
cess will end automatically.
adaptable to Various Types of lithium batteries
The X1 Pro will charge and discharge a variety of Lithium batteries
such as Li-ion, LiPo and the new LiFe series of batteries.
feaTures feaTures (cont.)