HITEC X1 Pro DC/DC Multi-Charger User Manual
Page 8
8
charge current. For maximum safety and charging effectiveness,
always match or exceed the main battery lead rating when as-
sembling or selecting your charging leads. If you charge a battery
at a high current rate (amperage) with a charging lead not rated
for the chosen amperage, the wire could get hot, catch fire, short
out and/or potentially destroy your battery and the charger. When
in doubt, always use a higher gauge wire (lower AWG number). It
is common to see charging leads constructed of 14AWG, 16AWG
or 18AWG wire.
Always refer to recommendations from your battery manufacturer
for your specific battery type and size before initiating a charge or
discharge process.
do not attempt to disassemble or modify lithium or lead-
acid battery packs.
WarnInGs and safeTY noTes (cont.)