HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 14)

14
feaTures (cont.) PoWer suPPlY connecTIons
delta-Peak sensitivity for niMH/nicd
This automatic charge termination program is based on the prin-
ciple of delta-peak voltage detection. When the battery’s voltage
exceeds the threshold, the charging process will be terminated
automatically.
automatic charging current limit
The charging current can be set by the user when charging NiCd
or NiMH batteries. The "AUTO" charging mode, however, is recom-
mended when charging NiMH batteries with low impedance and
capacity.
capacity limit
The charging capacity is always calculated as the charging current
multiplied by time. The charging process will terminate automati-
cally if the charging capacity exceeds the limit set by the user.
Temperature Threshold
The battery’s internal chemical reaction will cause the tempera-
ture of the battery to rise. The charging process will terminate
automatically if the charger’s temperature exceeds the limit set by
the user.
Processing Time limit
Protect your battery by setting a maximum time limit for charging
and discharging.
Pc control software “charge Master”
The free “Hitec Charge Master” software gives you unparalleled
ability to operate the charger through your PC. You can monitor
pack voltage, cell voltage and other data during charging and
view charge data in real-time graphs. You can also initiate pro-
cesses, control charging and update fi rmware .