HITEC X1 Pro DC/DC Multi-Charger User Manual
Page 33
33
nicd/niMH - re-Peak Mode (cont.)
nicd/niMH - cYcle Mode
charge the battery a maximum of 3 times consecutively.
The X1 Pro will use the amperage value entered in Charge Mode
for this operation.
Toggle and hold the joysick to the right
(►) for three seconds to
begin charging.
Once charging has commenced, the charger
will display the following real-time informa-
tion: battery type, charging current, battery voltage, charging time
and charged capactiy.
Once charging is complete, the screen will read “
END:fINIShED
”
and the charger will emit a chiming sound. Toggle left
(◄) once
to stop charging. You may toggle left
(◄) at any time during the
charging process to stop charging.
NiMh 1.6A 5.96V
RPC 002:51 00090
The X1 Pro makes cycling of NiCd/NiMH batteries easy. The process
of discharging and recharging (cycling) can be achieved automati-
cally with one simple step and will improve the performance of
NiCd/NiMH batteries. We strongly recommend cycling any battery
that has been discharged and stored for a preiod of time. This will
increase battery life and improve performance.
before You beGIn cYclInG Your baTTerY, Make
sure You HaVe read and undersTand all of
THe WarnInGs and safeTY InforMaTIon con-
TaIned on PaGes 4-9.
Warning