HITEC X1 Pro DC/DC Multi-Charger - Manual (Page 4)

4
faIlure To folloW THese WarnInGs can be consId-
ered neGlIGence bY THe oPeraTor and MaY neGaTe
anY claIMs for daMaGes Incurred.
Hitec RCD USA will not be held responsible for any damages or
injuries that may occur by persons who fail to follow these warn-
ings or who fail to properly follow the instructions in this manual.
InTroducTIon (cont.)
WarnInGs and safeTY noTes
These warnings and safety notes are of the utmost importance.
You must follow these instructions for maximum safety. Failure to
do so can damage the charger and the battery and, in the worst
cases, may cause a fire.
neVer leaVe THe cHarGer unaTTended WHen
IT Is connecTed To ITs PoWer source. If anY
MalfuncTIon Is found, TerMInaTe THe Pro-
cess IMMedIaTelY and refer To THe oPera-
TIon Manual.
Warning: Be sure to read this section for
your own safety.
caution: Be sure to read this section to pre-
vent accidents and damage to your charger.
Tip: This section will help you maximize the
performance of your charger.
note: This section will provide more detailed
explanations.
caution
Tip Warning
Warning
note