HITEC X1 Pro DC/DC Multi-Charger User Manual
Page 13
13
fast and storage Mode of lithium batteries
The X1 Pro features two styles of charging. “Fast” charge reduces
the charge duration while “Store” controls the final voltage of
your battery to optimize your packs for long term storage and
maximum lifespan.
cyclic charging/discharging
A battery can be cycled 1 to 5 times consecutively. This process is
good for refreshing and balancing your battery.
battery Memory
For your convenience, the X1 Pro will store the data pertaining
to a specific charge program for up to 10 batteries. The ability to
save and load these settings for a specific battery saves the user
lots of time.
Terminal Voltage control (TVc)
The charger allows the user to set the charge/discharge end voltage.
Warning
THIs Is for adVanced users onlY. neVer
eXceed THe baTTerY ManufacTurer's
recoMMendaTIons.
liPo battery Meter
The user can check a battery’s total voltage, the highest voltage,
the lowest voltage and each cell’s voltage.
re-Peak Mode of niMH/nicd battery
In Re-Peak Charge mode, the charger can peak charge the bat-
tery 1-3 times consecutively. This is good for making certain the
battery is fully charged and for checking how well the battery
receives fast charges.
feaTures (cont.)