Dolby Laboratories Digital-Satellite-Receiver - Manual (Page 24)

7.2 Programme selection
7.2.1 Using the Programme up/down keys
> You can move through the list one slot at a time, up or
down, by using the
Programme keys up/down
either on the receiver or on the remote control.
7.2.2 Using the numeric keys
> Use the numeric keys to enter the programme number
you wish to view.
For example:
1
for programme slot 1
1, then 4
for programme slot 14
2, then 3, then 4 for programme slot 234
When entering multi-digit programme numbers you have
approx. 3 seconds after pressing the key to complete your
entry.
If you wish to enter a number consisting of only one or two
digits, you can speed up the selection process by holding
down the key of the last digit a little longer.
7.2.3 Using the programme list
> Press
OK.
The programme list will now be displayed. In TV mode
only the TV programmes will be displayed, and in
radio mode only the radio programmes will be display-
ed. The programme currently selected is marked/high-
lighted.
(Fig. 7-1)
> Use the
arrow keys up/down to mark the desired
programme.
> Press the
yellow function key Preview to view a
preview of the programme highlighted.
> Press
OK to view the highlighted programme.
> Use the
arrow keys up/down to move the marker
around the list one line at a time.
> Use the
arrow keys right/left to move the marker
around the list, backward or forward, one page at a
time.
7.2.3.1 Selecting a list
To facilitate finding programmes your receiver is equipped
with several programme lists. You may select your
Favourites list (see Point 8.1), or display the alphabetically
sorted
Complete list or sort the list by Providers.
> Press
OK to display the active programme list.
24
(Fig. 7-1)
(Fig. 7-2)
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:14 Seite 24