Dolby Laboratories Digital-Satellite-Receiver - Manual (Page 65)

65
* Only for receivers equipped with
this feature
Problem Possible cause Solution
Time not displayed
*
while in stand-
by mode
Time not downloaded Switch to e.g. ZDF for 30 seconds
Receiver cannot be switched on, or
cannot be operated Receiver blocked Perform Flash reset: Caution! All
personal settings will be lost.
>
Disconnect mains plug.
> Press standby and program-
me up keys on receiver simul-
taneously, and keep them
depressed.
> With standby and programme
up keys still pressed down,
reconnect the mains plug.
> Keep keys depressed for
approx. 5 seconds until mes-
sage* “FLAS” appears.
No reception of encrypted program-
mes
*
Smartcard not inserted Insert valid Smartcard correctly
Smartcard not activated Contact Hotline to activate
Smartcard
bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 65