Dolby Laboratories Digital-Satellite-Receiver User Manual

Page 48

Advertising
background image

>

The search procedure can be terminated by pressing
the

red function key.

8.3.4 Manual Search

If a particular programme is not found by means of the auto-
matic or transponder search procedures, it may be necessary
to enter the unique PID number for this specific programme.
These numbers can be found in the Internet, or must be
obtained from the appropriate programme provider.
The menu

(Fig. 8-13)

differs from the menu

Transponder

search only in terms of the menu points PCR-PID, Audio-

PID and Video-PID. There is no need to enter the search
mode.
>

Proceed as described under Transponder Search.

>

Then use the

arrow keys up/down to mark the

lines

PCR-PID, Audio-PID and Video-PID using

the

numeric keys to enter the appropriate numbers.

8.3.5 After the Search

You can follow the progress of the search procedure on
screen even while the search on the transponders is still in
progress. When the search has been completed, the number
of transponders, programmes and new programmes found
will be displayed. In addition a message will be shown

(Fig. 8-

14)

, asking you whether you want to add the newly found pro-

grammes automatically to the TV or Radio list. If you decide
to accept the programmes automatically, you can then decide
whether these should be added to the Favourites list in

sor-

ted or unsorted form.
Sorted
The newly found programmes are sorted into the Favourites
list according to a pre-programmed schedule. The order in
which programmes are placed depends on the audio
language selected in Point 6.3.2 as well as on the country
selected in Points 6.2.2 and 6.2.3.
Unsorted
The newly found programmes are added to the end of the
Favourites list in unsorted form.
No
The newly found programmes are not added to the
Favourites list. They will still appear in the Complete list.

>

Use the

arrow keys right/left to select whether

you want to accept the programmes in

sorted or

unsorted form.

>

Confirm by pressing

OK.

Please note any messages displayed on screen.

>

Press the

Menu key to return to normal operation.

48

(Fig. 8-13)

(Fig. 8-14)

bed_anl_DVB13 CIP_englisch_q5.qxd 08.09.03 11:15 Seite 48

Advertising