LINK Systems OmniLink 5000 - Manual (Page 39)

April 17, 2000 Man ual Revisio n 1.0
4.18
Figure 4.6: Example Tonnage Waveform With Data Window 2 Settings Selected for View
Figure 4.6 shows an example tonnage monitor graph screen when viewing a data window. For the most
part, the screen is the same as when viewing peak tonnages.
Referring to Figure 4.6, some additional or different items on data window views are:
n) Data Window Bars - The lower portion of the graph display is used to indicate the active
area of the data windows. This graphically shows the position of
the data window with respect to the tonnage waveform. No bar
appears for Peak Tonnage since it is always active. The active
area of a data window is shown as a green horizontal bar on the
same line as the data window indicator ("D1", "D2", "D3", "D4"
for data windows 1, 2, 3, and 4 respectively). The position of a
data window appears even if the data window is turned OFF. This
allows location of the window to be set before allowing the limits
to cause stop signals.
o) Data Window Name - If a data windows’ setpoints are selected to be shown on the graph,
the name of the selected data window is highlighted in reverse
video.