LINK Systems OmniLink 5000 - Manual (Page 70)

April 17, 2000 Man ual Revisio n 1.0
8.2
CAUTION! Extreme care should be used in calibration procedures for tonnage monitors. Severe
damage to the machine being calibrated or the calibration equipment can result from
incorrect shut height adjustments. Injury to personnel calibrating the machine or to
others in the machine area can result from poorly implemented load cell or hydraulic
jack stacks that fly out of the machine under load. NEVER place hands between load
cell or hydraulic jack stacks and the machine slide! Link Systems provides calibration
services at a reasonable charge. These services should be used if there is doubt that
customer employees can correctly and safely calibrate a machine.