1 graph start angle, 2 graph end angle, 3 selecting the channel to graph – LINK Systems 5100-8 Tonnage & Analog Signal Monitor User Manual

Page 37: 4 graph pan/zoom mode, 1 graph, Start, Angle, Graph end angle, Selecting the channel to graph, Graph pan/zoom mode

Advertising

Doc

L-802-1110 Page

35 Rev.

Figure 12 shows an example of a graph screen in Pan/Zoom Mode. This mode allows easy zooming and
panning of the waveform on the screen.

Channel 1
Tonnage

EXIT

NEXT
CHANNEL

ZOOM FULL
SCALE

Use the arrow keys to pan the graph. Press the
“CANCEL PAN ZOOM MODE” key to return to normal mode.

ZOOM AUTO
SCALE

Angle: 180.0°

Tonnage: 89.8 Tons

Cursor Readout

CHANNEL 1 TONS - PEAK SETPOINTS

DW 1
DW 2
DW 3
DW 4

PEAK
INFO

Start

End

100.0

90.0
80.0
70.0
60.0
50.0
40.0
30.0
20.0
10.0

0.0

-10.0
-20.0
-30.0
-40.0
-50.0

160.0°

180.0°

200.0°

160°

200°

View Pts: 1085

CANCEL PAN
ZOOM MODE

ZOOM OUT
HORIZONTAL

HI LIM

LO LIM

RV LIM

In Figure 12, some points of interest are:

ZOOM FULL
SCALE Softkey

This softkey displays the graph from the beginning of the sample window to the
end of the sample window and from -100% of machine rating to 150% of
machine rating.

ZOOM AUTO
SCALE Softkey

This softkey causes the display to attempt to find the “interesting” portion of
the signature and zoom in on that part.

ZOOM OUT
VERTICAL Softkey

This softkey zooms out on the tonnage axis.

ZOOM IN
VERTICAL Softkey

This softkey zooms in on the tonnage axis.

CANCEL PAN
ZOOM MODE
Softkey

This softkey will return the tonnage display to the normal mode.

95.0

82.3

18.2

ZOOM IN
VERTICAL

ZOOM OUT
VERTICAL

GRAPH
SETTINGS

Cap Pts: 3143

ZOOM IN
HORIZONTAL