Pitney Bowes DI950 FastPac Inserter - Manual (Page 122)

6-10 SV61311 Rev. E
6 • Reference
“Inserts” are defined as material that does not require folding (may be pre-
folded) before insertion into letter-sized envelopes. This definition includes
individual sheets, collations of unfastened sheets, C folded or single folded
inserts or pre-made, bound booklets (no fastener exposed that might dam-
age rollers).
Additionally, "insert" also refers to a single reply envelope (BRE) when in-
serted into a flat-sized envelope.
Material Substrates
Acceptable paper types include new or recycled bond, text, laser and offset.
Offset coatings include matte, dull or gloss.
NOTE: Use of glossy material may degrade system performance.
Grain
Material may be short or long grain.
Printing
Printing may be simplex (one side) or duplex (both sides) with no restriction
on color.
Coating
Varnish applied to sheets to modify finish is allowed.
Feeder Tower - Insert Specifications
Parameter Minimum Value Maximum Value
Width 5 inches (127 mm) 9.84 inches (250 mm)
Length 2.83 inches (72 mm) 6 inches (153 mm)
Thickness 0.003 inches (.076 mm) 0.1 inches (2.54 mm)
Paper Weight 16 lb. (60 gsm) 44 lb. (175 gsm)
Inserts