Pitney Bowes DI950 FastPac Inserter - Manual (Page 17)

SV61311 Rev. E 1-7
Introduction • 1
• To obtain supplies and/or Material Safety Data Sheets, contact your
system supplier. Refer to the Contact Informaton Lst at the front of this
guide for more information.
• Operation of this equipment without periodic maintenance will inhibit
optimum operating performance and could cause the equipment to mal-
function. Contact your system supplier for the required service schedule.
• Always follow specific occupational safety and health standards for your
workplace.
• To reduce the risk of fire or electrical shock, DO NOT attempt to remove
covers or disassemble the control panel or its base. The cabinet enclos-
es hazardous parts. If you should damage the unit, contact your system
supplier. Refer to the Contact Informaton Lst at the front of this guide for
more information.
If your stacker has an AC adapter to power the stacker:
• Use only the AC adapter designed specifically for the stacker. Third-party
AC adapters may damage the stacker.
• To protect against electrical shock, plug the AC adapter power cord into
a properly grounded wall outlet.
• Do not route the AC adapter cable over sharp edges or trap it between
furniture.
Safety
Information
(continued)
Warning Labels The following warning labels are attached to modules on the system to alert
you to potential injury that could occur with careless operating procedures.
These same labels will be shown throughout the manual as they apply to
the various modules that are discussed in that section.
NOTICE CAUTION
Moving mechanism can result
in personal injury.
Keep hands, long hair, ties,
jewelry and loose clothing
away from moving parts.
CAUTION
Moving mechanism can result in
personal injury.
Keep hands, long hair, ties,
jewelry and loose clothing away
from moving parts.