Suretrac™ process verification system, Suretrac, Process verification system -13 – Pitney Bowes DI950 FastPac Inserter User Manual

Page 139: Add-on modules • 7, Process verification system

Advertising
background image

SV61311 Rev. E

7-13

Add-On Modules • 7

Printing a Cover

Sheet to the Top

of the Attached

Printer

The Attached Printer can print a cover sheet containing the scan definition to

the top of printer. You can use this information to set up the Scan Configura-

tion on the inserter.
1. From the Home screen, select "Loading Instructions", then "Pre-Run

Adjustments", and finally, "Print Cover Sheet to Top of Printer".

2. Remove the cover sheet from the top of the printer.
3. Select "Continue" to return to the Pre-Run Adjustments screen.
Refer to Settng Up a New Scan Confguraton in Chapter 8 for information

about setting up a Scan Configuration on the inserter.

The SureTrac

Process Verification System consists of a server and a cli-

ent. The server monitors and records information about the mail pieces

processed on the inserter. The client system runs the Mail Creation Print

Manager application that you use to create the PDF documents that the in-

serter turns into finished mail pieces.
You typically use the SureTrac

Process Verification System to run jobs in

either a closed loop mode or an open loop mode.
• In the closed loop mode, the client creates the PDF on the client PC and

a Mail Run Data File (MRDF) on the server PC. The server monitors

and records information about every mail piece as it is processed on the

inserter. As the inserter processes a mail piece, it sends status informa-

tion to the server PC about the disposition of the mail piece. The tracking

and disposition information is stored in the Mail Run Data File (MRDF)

on the server PC.

• In the open loop mode, the server is not required. The client can upload

scan code information from the inserter if the inserter is connected (via

network) to the client PC. This mode is also referred to as online open

loop mode. In this mode, you can use the scan codes from the inserter

when you create the PDF. If there is no connection between the inserter

and the client PC, you use the Mail Creation Print Manager to create the

scan codes used in the PDF.

SureTrac

Process

Verification

System

Advertising
This manual is related to the following products: