Waldorf Wave 3.v - Manual (Page 14)

Basic Operation
PPG Wave 3.V User´s Manual 14
Switches
Switches are represented by
“LEDs”. If a function is active, its
“LED” will be lit red. To
activate/deactivate a function, click on its “LED”.
Buttons
A mouse click on a button activates a
function. The DIGI button can for instance be
used to open the DIGITAL menu. Except for
the PANEL button, buttons light up in blue
when they have been used. Button states are not saved
with programs.
Selection Switches
These allow you to set a
parameter value to ON or
OFF. Click on the value to switch between ON and OFF.
Display
The information display shows parameter information and
a brief description of the parameter function. In addition,
MIDI controller allocations (CTRL) and the current
numerical value of the parameter are displayed as well as
the actual multi part. If you hover over a parameter using
the mouse, the corresponding information appears in the
information display. Clicking on the arrow buttons leftside
of the sound program name allows you to switch forth
and back between programs. Clicking on the arrow
rightside opens a pop-up menu for fast program selection
within the actual bank.
Envelopes and Graphs
Click on the respective
handle of an envelope
and drag into the
desired direction to
change the desired envelope parameter. You can also
doubleclick on any selected value to open a text field for
direct value input.
Click and move your mouse vertically within the LFO and
oscillator graphs to change the desired parameter.