Waldorf Wave 3.v - Manual (Page 55)

The Controls
55 PPG Wave 3.V User´s Manual
High Cut 41.18...22050 Hz
Determines the frequency where the higher frequency
parts are divided from the effect signal. This parameter
works in the same way as the lowpass filter in the PPG
Wave 3.V´s sound synthesis. A natural reverb doesn´t
produce all frequencies equally, so the lowpass cuts the
higher frequencies to produce a more realistic reverb
effect.
Low Damp 41.18...22050 Hz
High pass filter in the feedback loop of the late reverb.
Determines how fast the room simulation dampens the
lower reverb frequencies. This phenomenon makes a
natural echo sound somewhat hollow. Higher values of
the Damping parameter mean that more low frequencies
will be dampened.
High Damp 41.18...22050 Hz
Low pass filter in the feedback loop of the late reverb.
Determines how fast the room simulation dampens the
higher reverb frequencies. This phenomenon makes a
natural echo sound somewhat hollow. Higher values of
the Damping parameter mean that more high frequencies
will be dampened.
Reverb Examples
All examples with Feedback set between 0 and 40.
Room Size Shape
Oil Barrel 0-2 0-40
Chamber 2-5 0-40
Room 2-10 ~64
Club 10-16 ~64
Medium Hall 16-32 ~64
Large Hall 32-64 ~64
Car Park 50-80 0-40
Underground
Car Park 50-80 64-127
Tunnel 100 40
Underbridge 50-70 0-40