Waldorf Wave 3.v User Manual
Page 43
The Controls
43
PPG Wave 3.V User´s Manual
w
The regular modulation table doesn´t offer
modulation amounts in many cases. Instead an
ON/OFF function as in the original PPG Wave is
available. Besides this not all modulations are
possible. If you want to take use of all modulations
you should activate the FINE parametrer.
w
Keep in mind, that some modulations are not possible
(e.g. Velocity to OSC PITCH). These modulations are
greyed out.
The following modulation sources are available:
•
BEND offers a modulation by using the pitch bend
wheel in the plug-in or on your master keyboard.
•
LFO MW offers a combined modulation of the LFO
in conjunction with the modulation wheel on your
master keyboard. Modulation intensity of the LFO
can be controlled with the Modulation wheel. If it is
fully turned down, no modulation takes place. You
can also use Aftertouch instead of the Modulation
wheel. Click on the TOUCH button above the LFO
MW source to activate it. Keep in mind that you have
to move up the modulation wheel to maximum
before you can hear the aftertouch modulation.
•
LFO offers a modulation based on the settings of the
LOW FREQ OSCILLATOR.
•
MOD WHL offers a modulation based on the settings
of the modulation wheel on your master keyboard.
•
KEY offers a modulation based on the pitch of a
played MIDI note.
•
VEL offers a modulation based on the velocity of a
played note.
•
TOUCH offers a modulation based on the Aftertouch
of a played note. Keep in mind that your master
keyboard has to generate aftertouch data to use this
function.
The following modulation destinations are available:
•
OSC PITCH means the pitch of the main oscillator.
•
SUB PITCH means the pitch of the sub oscillator.