Waldorf Wave 3.v - Manual (Page 41)

The Controls
41 PPG Wave 3.V User´s Manual
• The setting 12 CENTS detunes the sub oscillator by
12 cent.
• The setting 24 CENTS detunes the sub oscillator by
24 cent.
• The setting 7 SEMI detunes the sub oscillator by 7
semitones (a Fifth) upwards.
• The setting 1 OCT detunes the sub oscillator by one
octave upwards.
• The setting 2 OCT detunes the sub oscillator by two
octaves upwards.
TOTAL TUNE 400...499 Hz
This parameter changes the overall tuning of the PPG
Wave 2.V. The value refers to the reference pitch for MIDI
note A3. The standard setting for this is 440 Hz, which is
used by most acoustic and electric instruments. We
recommend that you only change the overall tuning, if
you are sure of what you’re doing. Please keep in mind to
adjust the tuning of all other used instruments, if you
change Total Tune.
w
We have no idea, why this parameter was adjustable
between 400 Hz and 499 Hz in the original PPG. But
to keep the charm of the original, we have
implemented it in the same way.
ENV 3>OSC ON / OFF
You can use this parameter to select the AD-Envelope 3 as
a modulation source for the pitch of the main oscillator.
You can use this to create a rising pitch in the Attack
phase, for example. Using ENV 3 ATT on the analog user
interface, you control whether the deflection should be
positive or negative.
ENV 3>SUB ON / OFF
You can use this parameter to select the AD-Envelope 3 as
a modulation source for the pitch of the sub oscillator.
Using ENV 3 ATT on the analog user interface, you
control whether the deflection should be positive or
negative.
SEMITONE>KEY ON / OFF
If active, all eight SEMITONE settings will be cycled upon
each note. To hear this effect you have to set the KEYB
MODE
parameter in the DIGITAL panel to Poly.