Waldorf Wave 3.v - Manual (Page 51)

The Controls
51 PPG Wave 3.V User´s Manual
Feedback 0...100%
Controls the feedback amount of the delay signal.
Mod Depth 0...100%
Determines whether the feedback signal is fed back into
the Phaser as is, or is inverted beforehand.
Mod Spread 0...360
Sets the modulation depth of the Phaser effect in degree.
CHORUS
A Chorus effect is generated by using Comb filters that
generate slightly detuned copies of the input signal and
mix it into the output signal. The result sounds like an
ensemble of several simultaneous sounds, like a choir as
opposed to a single voice; hence the name Chorus. The
detuning is generated by an internal LFO that can be
controlled in speed and depth. The Chorus’ high
frequency output can be dampened with the Cutoff
parameter. The Chorus effect offers besides the known 2
Stage mode (1 left, 1 right) also 4 (2 / 2) and 6 (3 / 3) Stage
modes. This results in a far denser chorus effect perfectly
suited for lush string or pad sounds. Furthermore, it sports
feedback, which makes the Chorus also act like a Flanger.
w
A Mix setting of 48 to 96 produces the strongest
effect because both the unaffected signal and the
processed signal are mixed together.
Stages 2 / 4 / 6
Sets the number of Chorus stages. Higher settings result in
a denser effect.
Delay 0.023...46.417 ms
Sets the initial delay that is added to the Chorus delay
line.
Mod Speed 0...20 Hz
Sets the LFO speed of the Chorus effect
Mod Shape SINE / TRIANGLE
Determines the shape of the modulation source for the
Chorus effect.
Feedback 0.0...100%
Feeds the Chorus output signal back to its input.