Waldorf Wave 3.v - Manual (Page 52)

The Controls
PPG Wave 3.V User´s Manual 52
Mod Depth 0.0...100%
Sets the modulation depth of the Chorus effect.
Mod Spread 0...360
Adjusts the phase offset of the LFOs of the right stereo
output compared to the left and the speed deviation of the
additional Chorus LFOs compared to the LFOs of the first
two stages. When set to 0, all LFOs are in sync and the
Chorus resembles the sound of old string machines.
Higher values result in wider Chorus effects. We
recommend a setting of 180 for a wide balanced sound.
DELAY
A Delay is an effect that produces echoes of the input
signal. An additional LFO can modulate the delay times.
Clock ON / OFF
Synchronizes the Delay to the song tempo of your host
application.
Delay 0...2000 or 1/512t...13 bars
Sets the length of the Delay tap. Delay offers a range of
usefull musical values. These are only available when
Clock is set to ON. If activated, a small arrow lits up.
Click on it to open a pop-up menu for faster selection of
delay times with musical values.
Mod Speed 0...20 Hz
The delay effect can be modulated in its delay time with
the integrated LFO. Speed determines the frequency of
this LFO.
Spread 0:100...100:0 %
Spreads the left and right delay output to half of the delay
time maximum. Leftmost and rightmost settings (100:0 %
or 0:100 %) create a typical ping pong delay.
Feedback 0...100%
Controls the amount of signal that is routed back into the
Delay line. Lower values therefore produce fewer echoes
than higher values.
Mod Depth 0.0...100%
Controls the modulation depth when delay time is
changed by means of the LFO. The depth ranges from no
delay to the amount set by the Delay parameter.