Cap_mount – Altera Device-Specific Power Delivery Network User Manual
Page 17
Advertising
Figure 9: Plane_Cap Tab
Enter the design specific information such as plane dimensions, plane configuration and the dielectric
material used in the Planar Capacitance table. The tool calculates a plane capacitance value. You can save
custom values, restore custom values, or restore the default settings.
Cap_Mount
The Cap Mount tab calculates the capacitor mounting inductance seen by the decoupling capacitor.
Note: Power rails on different layers have different mounting inductances. For the best results, run the
PDN separately for each layer set.
UG-01157
2015.03.06
Cap_Mount
17
Device-Specific Power Delivery Network (PDN) Tool 2.0 User Guide
Altera Corporation
Advertising