The flash tab, User leds –8 pushbutton switches –8, The flash tab –8 – Altera Arria II GX FPGA User Manual
Page 28
Advertising
6–8
Chapter 6: Board Test System
Using the Board Test System
Arria II GX FPGA Development Kit User Guide
February 2011
Altera Corporation
User LEDs
This control displays the current state of the user LEDs. Click the graphical
representation of the LEDs to turn the board LEDs on and off.
Pushbutton Switches
This read-only control displays the current state of the board user push buttons. Press
a push button on the board to see the graphical display change accordingly.
The Flash Tab
The Flash tab allows you to read and write flash memory on your board.
shows the Flash tab.
The following sections describe the controls on the Flash tab.
Figure 6–4. The Flash Tab
Advertising
This manual is related to the following products: